DS3800HSCD1J1G SPEEDTRONIC MARK IV GE INPUT BOARD

The GE High Level Non-Isolated Input Board DS3800HSCD1J1G features a modular connector on 1 end and retention levers on the other end. The board is populated with a multiple capacitors. The board is populated with multiple transistor-transistor logic devices. The GE High Level Non-Isolated Input Board DS3800HSCD1J1G is also populated with 16 red indicator LEDs and 1 amber indicator LED. The board also has 1 Socket for electrically erasable programmable read-only memory (EEPROM) modules. The board is also populated with 3 trimmer resistors.

For the GE High Level Non-Isolated Input Board DS3800HSCD1J1G to function properly, it must be installed in the rack so that the board can receive current to power the board through the modular connector. It must also be connected so that it can send and receive control signals. The current and the control signals are carried over the modular connector which is located on the board. Another modular connector is located in the board rack. The modular connectors meet to make the physical connections. The retention levers on the board secure the board and ensure the modular connectors remain attached. To secure the board, hold the board by the retention levers in the open position and slid it into the rack. Keep the board from hitting against other components in the drive. This might knock components off the board or damage components. It might disconnect components and cables.

General Electric DS3800HSCD1J1G SPEEDTRONIC MARK IV GE INPUT BOARD Programmable PLC General Electric Water Pump General Ac Electrical General Electric Contactor.

IC697MDL254 As a 48 Volt AC, 32-Point Input Module the GE Fanuc 90-70 IC697MDL254 features 32 Points - Four isolated groups of 8 points each. The 48 volt AC Input...
IC697MDL340 GE Fanuc 90-70 IC697MDL340 is a 120 Volt AC, 2 Amp, 16-Point Output Module. GE Fanuc 90-70 IC697MDL340 provides a high degree of inrush current which makes...
IC697MDL341 The 120/240 Volt AC, 2 Amp Isolated 12-Point Output Module is the GE Fanuc 90-70 IC697MDL341. The 120/240 Volt AC 2 Amp Isolated Output Module GE Fanuc 90-70...
IC697MDL350 The 120 Volt AC 0.5 Amp Output Module GE Fanuc 90-70 IC697MDL350 provides 32 output points in four isolated groups of 8 points each. GE Fanuc 90-70...
IC697MDL640 GE Fanuc 90-70 IC697MDL640 is a 125 Volt DC Positive/Negative Logic, 16-Point Input Module. GE Fanuc 90-70 IC697MDL640 has Positive/Negative Logic...
IC697MDL651 The 5VDC, TTL Input Module GE Fanuc 90-70 IC697MDL651 provides 32 TTL compatible input points which are configured as one group. GE Fanuc 90-70 IC697MDL651 is...
IC697MDL652 The 12 Volt DC Positive/Negative Logic Input Module GE Fanuc 90-70 IC697MDL652 provides 32 input points in four isolated groups of eight points each....
IC697MDL653 GE Fanuc 90-70 IC697MDL653 is a 24 Volt DC Positive/Negative Logic, 32-Point Input Module. The GE Fanuc 90-70 IC697MDL653 has 32 Points - Four isolated groups...
IC697MDL654 The 48 Volt DC Pos/Neg Input Module GE Fanuc 90-70 IC697MDL654 provides 32 input points in four isolated groups of eight points each. GE Fanuc 90-70...
IC697MDL671 Interrupt Module GE Fanuc 90-70 IC697MDL671 is a 14 Point wth 24 Volt DC Positive/Negative Logic. The GE Fanuc 90-70 IC697MDL671 16 points total - 4 isolated...
IC697MDL740 The 24/48 Volt DC 2 Amp Output Module GE Fanuc 90-70 IC697MDL740 provides 16 output points in four isolated groups of 4 points each. Each group of four...
IC697MDL750 The 24/48 Volt DC 0.5 Amp Output Module GE Fanuc 90-70 IC697MDL750 for the Programmable Logic Controller (PLC) provides 32 output points in four isolated...
IC697MDL752 GE Fanuc 90-70 IC697MDL752 is a 12 Volt DC 0.5 Amp Output Module which provides 32 output points in four isolated groups of 8 points each. GE Fanuc 90-70...
IC697MDL753 The 5/48 Volt DC 0.5 Amp Negative Logic Output Module GE Fanuc 90-70 IC697MDL753 provides 32 output points in two isolated groups with 16 points in each...
IC697MDL940 The 16 point Relay Output Module GE Fanuc 90-70 IC697MDL940 is versatile, rugged, and easy to use. GE Fanuc 90-70 IC697MDL940 16 points - 8 isolated Form C -...
IC697MEM713 GE Fanuc 90-70 IC697MEM713 provides 64 Kbytes of memory. GE Fanuc 90-70 IC697MEM713 is used for expansion of CPU 771, CPU 772, or PCM. GE Fanuc 90-70...
IC697MEM715 GE Fanuc 90-70 IC697MEM715 provides 128 Kbytes of memory. GE Fanuc 90-70 IC697MEM715 is used for expansion of CPU 771, CPU 772, or PCM. GE Fanuc 90-70...
IC697MEM717 GE Fanuc 90-70 IC697MEM717 provides 256 Kbytes of memory. GE Fanuc 90-70 IC697MEM717 is used for expansion of CPU 771, CPU 772, or PCM. GE Fanuc 90-70...
IC697MEM719 GE Fanuc 90-70 IC697MEM719 provides 512 Kbytes of memory. GE Fanuc 90-70 IC697MEM719 is used for expansion of CPU 771, CPU 772, or PCM. GE Fanuc 90-70...
IC697MEM731 The GE Fanuc 90-70 IC697MEM731 provides 128 KByte, 32-bit CMOS Expansion Memory for the IC697CPU78X CPU modules. Memory on the GE Fanuc 90-70 IC697MEM731 is...
IC697MEM732 The GE Fanuc 90-70 IC697MEM732 provides 256 Kbyte with 256Kbyte Non-Volatiel Flash memory, 32-bit CMOS Expansion Memory for the IC697CPU78X CPU modules....
IC697MEM733 The GE Fanuc 90-70 IC697MEM733 provides 256 KByte, 32-bit CMOS Expansion Memory for the IC697CPU78X CPU modules. Memory on the GE Fanuc 90-70 IC697MEM733 is...
IC697MEM735 The GE Fanuc 90-70 IC697MEM735 provides 512 KByte, 32-bit CMOS Expansion Memory for the IC697CPU78X CPU modules. Memory on the GE Fanuc 90-70 IC697MEM735 is...
IC697MSC802 GE Fanuc 90-70 IC697MSC802 is a GMR Redundancy System. GE Fanuc 90-70 IC697MSC802 has 486, 2K TMR I/O,( 56384559,Rack, P/S, CPU, RAM, 3-GBC). GE Fanuc 90-70...
IC697PCM711 The Programmable Coprocessor Module GE Fanuc 90-70 IC697PCM711 is a single slot coprocessor. GE Fanuc 90-70 IC697PCM711 an be programmed to perform operator...
IC697PWR710 GE Fanuc 90-70 IC697PWR710 is a rack-mounted 120 VAC Power Supply unit that plugs directly into a 48-pin backplane-mounted connector in the leftmost slot in...
IC697PWR711 The 100 Watt Power Supply Module GE Fanuc 90-70 IC697PWR711 is a rack-mounted unit that plugs directly into a 48-pin backplanemounted connector in the...
IC697PWR711*FM The 100 Watt Power Supply Module GE Fanuc 90-70 IC697PWR711 is a rack-mounted unit that plugs directly into a 48-pin backplanemounted connector in the...
IC697PWR720 GE Fanuc 90-70 IC697PWR720 is a single-slot module that plugs into the power supply slot, which is the leftmost slot in an IC697 rack. GE Fanuc 90-70...
IC697PWR724 The 24 VDC, 90 Watt Power Supply Module GE Fanuc 90-70 IC697PWR724 is a rack-mounted unit that plugs directly into a 48-pin backplanemounted connector in the...
IC697PWR748 The 48 VDC, 90 Watt Power Supply Module GE Fanuc 90-70 IC697PWR748 is a rack-mounted unit that plugs directly into a 48-pin backplanemounted connector in the...
IC697RCM711 The Redundancy Communications Module GE Fanuc 90-70 IC697RCM711 provides a path for a sychronizing message from the active to the back up unit which is used...
IC697VDD100 Digital Input, GE Fanuc 90-70 IC697VDD100 has 24VDC, Source, 64 point. In addition, the GE Fanuc 90-70 IC697VDD100 can be configured for SOE (Sequence Of...
IC670ALG230 The GE Field Control Current Source Analog Input Module IC670ALG230 accommodates 8 inputs on a common power supply. The same 24...
IC670ALG240 The 16 point grouped analog input module, GE Field Control IC670ALG240, can accommodate 16 current loop inputs on a common power supply. The GE Field Control...
IC670ALG310 An 8 Point Isolated Analog Voltage-source Output Module GE Field Control IC670ALG310 provides eight channels of analog voltage outputs with user–configurable...
IC670ALG320 analog output module Ge Field Control IC670ALG320 provides a group of four current/voltage analog outputs. Each output channel on the Ge Field Control...
IC670ALG330
The 8 point analog current-source output module, Ge Field Control IC670ALG330, accommodates 8 current-loop outputs on a common power supply. Ge Field...

IC670ALG620 Analog input module Ge Field Control IC670ALG620 accepts inputs from 4 independent 3-wire and/or 4-wire platinum, nickel, nickel/iron, or copper RTDs. Ge...
IC670ALG630
The thermocouple analog input module Ge Field Control IC670ALG630 accepts 8 independent thermocouple or millivolt inputs. The Ge Field Control...

IC670CBL002 GE Field Control IC670CBL002 is a 21" I/O expansion cable. The GE Field Control IC670CBL002 the connecting cable(s) between terminal blocks. The GE Field...
IC670CBL003 GE Field Control IC670CHS003 is a cable for connector style I/O base. GE Field Control IC670CHS003 has a 2 meter, 18 AWG, Connector on One End. GE Field...
IC670CBL004 The 1 meter cable, GE Field Control IC670CBL004 is for a connector-style terminal block. The GE Field Control IC670CBL004 has connectors on both ends. GE...
IC670CHS001 GE Field Control IC670CHS001 is a generic wiring bases that provides module mounting, backplane communications, and terminals for user connections. Two...
IC670CHS002 The GE Field Control IC670CHS002 is an I/O terminal block that is are generic wiring bases that provide module mounting, backplane communications, and...
IC670CHS003 GE Field Control IC670CHS003 is a cable for connector style I/O base, 2 meter, 18 AWG, connector on one end. Use of keying is recommended to ensure...
IC670CHS004 The thermocouple terminal block GE Field Control IC670CHS004 can be used to provide local reference junction compensation for thermocouples used in...
IC670CHS101 GE Field Control IC670CHS101 are generic wiring bases that provide module mounting, backplane communications, and terminals for user connections. The...
IC670CHS102 GE Field Control IC670CHS102 I/O terminal blocks are generic wiring bases that provide module mounting, backplane communications, and terminals for user...
IC670CHS103 Providing module mounting, backplane communications, and terminals for user connections, the GE Field Control IC670CHS103 is a I/O terminal blocks are generic...
IC670GBI002 The GE Field Control IC670GBI002 is a bus interface unit. The GE Field Control IC670GBI002 support hot insertion/removal of I/O modules whose catalog number...
IC670GBI102 GE Field Control IC670GBI102 is a 115VAC/125VDC bus interface unit. GE Field Control IC670GBI102 support hot insertion/removal of I/O modules whose catalog...

Contact us if you need more details on General Electric DS3800HSCD1J1G. We are ready to answer your questions on packaging, logistics, certification or any other aspects about SPEEDTRONIC MARK IV、GE INPUT BOARD. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : General Electric Fanuc > General Electric